MSI-P710-X ZigBee Wireless Card |
|
||
A
16C550 UART interfaces the XBee module to the PC/104 bus. The UART
provides a 16 byte transmit and receive FIFO and baud rates are
programmable from 1200 to 115,200 bits/s. Automatic hardware RTS and
CTS flow control is used to prevent overflow of the local receiver and
remote receiver FIFOs. The card I/O address is jumper selectable for
COM1 thru COM4 with an optional 16-bit offset address. Ten interrupts
are
jumper selectable for ranges contained in IRQ2 thru IRQ15. The
antenna connection to the card is provided by a SMA bulkhead connector.
A 6" cable attaches this connector to the rf module which permits its
removal from the card
bracket for mounting into the user enclosure as an option. A sample
BASIC test program is
supplied that illustrates programming of the card for various XBee PRO
commands. A BASIC interpreter for running this program is available at
no charge. Operates from -40° to 85° C and requires only +5V. Data Sheet (Adobe Acrobat Format) MSI-P710
User
Manual (Adobe Acrobat Format) XBee/XBee-PRO ZB User Manual
(Adobe Acrobat Format) Email: staff@microcomputersystems.com
|
|||